|
Basic Preventative Maintenance For Class CS100/MFC7000 Machines
Like all things mechanical that work in an
environment that can have airborne dust and dirt, the new CS100 machines
need some Tender Loving Care. The machines are designed for collarette
attachment, elastic and lace attachment, Lapseaming and hemming
applications. The maintenance described here should be performed every 6
months or 2000 hours of operation.
-
Remove the bottom cover with its quad
ring and using a clean rag, wipe away any excess oil or contaminants
from the bottom cover, then check the quad ring for tears, cracks or dry
rot. (Replace if necessary).
-
To drain the old oil remove the plug
screw located in the bottom cover A magnetic plug screw is used to
collect foreign material on the magnetic portion of the screw. This
should be cleaned at every oil change. Then replace the screw.
-
Remove the cloth plate, Oil reservoir cover
with gasket, wipe excess oil or contaminants from covers and reservoirs.
|
 |